Recommended grinding instruments for GLAS S - C E RAMI C S
Smoothing out of attachment points (e.g., Sprues)
Grinder | Diadur DD-8 | Super Max | Diamond Stone | Diagen Turbo Grinder |
Disk | Disk |
| Disk | Disk |
Komet Brassele | EVE | edenta | Jota | Bredent |
Finishing of Surfaces
Grinder | Diadur DD-8 | CeraPro | Diamond Stone | Diagen Turbo Grinder |
Cone | Cone | Yellow | Cone | Cone |
Komet Brassele | EVE | edenta | Jota | Bredent |
Finishing of Margins
Ceramic Polisher: 9690 / 9691 | Diapol L26DG / L26Dmf | CeraGloss / Blue / Yellow | Diamond Stone | High End Power Disk 626-C / 626-M |
Komet Brassele | EVE | edenta | Jota | Bredent |
Tips:
The smaller the diameter of the disks, the lighter are the vibrations and the easier the marginal areas can be finished.
Tungsten carbide burs must not be used for glass-ceramic materials.
The above mentioned grinding instruments are recommended for Ivoclar Vivadent glass-ceramic materials.
The instructions of the corresponding manufacturer regarding the correct use, speed, additional indications, etc. have to be observed.
The listed shapes represent only a selection available from the corresponding manufacturer. The respective product range should be considered.
bullet points
Smoothing out of attachment points (e.g., Sprues)
Grinder: Disk - Komet Brassele
Diadur DD-8: Disk - EVE
Super Max: edenta
Diamond Stone: Disk - Jota
Diagen Turbo Grinder: Disk - Bredent
Finishing of Surfaces
Grinder: Cone - Komet Brassele
Diadur DD-13: Cone - EVE
CeraPro: Yellow - edenta
Diamond Stone: Cone - Jota
Diagen Turbo Grinder: Cone - Bredent
Finishing of Margins
Ceramic Polisher 9690 / 9691 - Komet Brasseler
Diapol L26DG / L26Dmf - EVE
CeraGloss / Blue / Yellow - edenta
Diamond Polisher - Jota
High End Power Disk 626-C / 626-M - Kenda
Tips:
The smaller the diameter of the disks, the lighter are the vibrations and the easier the marginal areas can be finished.
Tungsten carbide burs must not be used for glass-ceramic materials.
The above mentioned grinding instruments are recommended for Ivoclar Vivadent glass-ceramic materials.
The instructions of the corresponding manufacturer regarding the correct use, speed, additional indications, etc. have to be observed.
The listed shapes represent only a selection available from the corresponding manufacturer. The respective product range should be considered.
TIPS SHORTENED
Tips:
Smaller disk diameters reduce vibrations, aiding in easier marginal area finishing.
Avoid using tungsten carbide burs for glass-ceramic materials.
These tools are recommended for Ivoclar Vivadent glass-ceramic materials.
Follow manufacturer instructions for proper use, speed, and additional indications.
The listed shapes are a selection; consider the full product range of each manufacturer.